Used 2003 MazdaB2300
- Body/Seating
- Truck/3 seats
- Fuel Economy
- 23/26 MPG City/Hwy
- Transmission
- Automatic
- Drivetrain
- RWD
- Engine
- 4
- VIN
- 4F4YR12D03TM11634
- Stock Number
- M11634
Included Packages & Accessories
- Pass Key Security
- Dual Front Air Bag
- Active Belts
- Conventional Cab
- Regular Bed
Detailed Specifications
- Front beverage holders
- Front anti-roll bar
- Front tires: 225/70SR15.0
- Front wheel independent suspension
- Power steering
- Rear tires: 225/70SR15.0
- Speed-sensing steering
- Wheel size: 15"
- AM/FM radio
- Speakers: 2
- Front center armrest: w/storage
- Front seats: bench
- Max seating capacity: 3
- Cylinder configuration: I-4
- Drive type: rear-wheel
- Engine liters: 2.3
- Engine location: front
- Fuel economy city: 23mpg
- Fuel economy highway: 26mpg
- Fuel tank capacity: 16.5gal.
- Horsepower: 143hp @ 5,250RPM
- Number of valves: 16
- Recommended fuel: Regular Unleaded
- Sequential multi-point fuel injection
- Torque: 154 lb.-ft. @ 3,750RPM
- Transmission: 5 speed automatic
- Approach angle: 21 deg
- Departure angle: 15 deg
- Ground clearance (min): 170mm (6.7")
- Rear cargo: tailgate
- Rear step bumper
- Compression ratio: 9.70 to 1
- Curb weight: 1,361kg (3,001lbs)
- Engine bore x stroke: 87.6mm x 94.0mm (3.45" x 3.70")
- Engine displacement: 2.3 L
- Engine horsepower: 143hp @ 5,250RPM
- Engine torque: 154 lb.-ft. @ 3,750RPM
- Exterior body width: 1,763mm (69.4")
- Exterior height: 1,648mm (64.9")
- Exterior length: 4,763mm (187.5")
- Front headroom: 996mm (39.2")
- Front hiproom: 1,339mm (52.7")
- Front legroom: 1,077mm (42.4")
- Front shoulder room: 1,384mm (54.5")
- GVWR: 1,978kg (4,360lbs)
- Payload: 572kg (1,260lbs)
- Towing capacity: 1,016kg (2,240lbs)
- Turning radius: 5.7m (18.8')
- Wheelbase: 2,835mm (111.6")
- Display: analog
- Oil pressure gauge
- Tachometer
- Variably intermittent wipers
- Voltmeter
- ABS brakes
- Dual front impact airbags
- Ignition disable
- Passenger cancellable airbag
KBB.com Consumer Reviews
- 5.0
Great truck for the price
By Jon jon on Sunday, March 28, 2021
Truck runs great . Parts are accessible if needed, easy to fix. Simple and reliable. Basic. Newer cars are over complicated and hard To work on. I plan on running it for 180000 more miles. - 5.0
Punches above its weight class.
By donsengine on Sunday, March 17, 2024
As a lifelong professional mechanic, when I go looking for a vehicle, it has to be above all else easy to maintain and have affordable parts available. The B2300 with 4 Cyl and 5 speed is a real basic, easy to keep up and cheap on parts/fuel little truck. Built from about 94 to to 06 as both the Ford Ranger and B series Mazda, the parts were sourced from all over the Mazda/Ford bins. Sounds bad, but not being special, they cross over to everything and are a dime a dozen. My brother moans and groans every time he has to get his Toyota worked on. I laugh myself to the bank with parts savings when It does need work. The truck is comfortable drive, turns tighter than a jeep, will haul in mass more than a full size short bed truck, has a low enough tailgate to load easy, is easy on gas, everything in the cab is laid out for easy operation, It will definitely haul more weight than its listed for, has much better visibility than newer trucks especially the full sizers, Has more cab room than the modern Ranger/Colorado size trucks, in other words, it punches well above its weight class. This is my second Mazda B series. I drove a B2000 for years and only sold it for an overseas military move. This B2300 I bought on return from the EU and its probably one of the best vehicles I've owned. If it got wrecked or solen, Ide look for another one. I wouldn't even waste time/money with a new truck. - 5.0
Best truck I have ever owned
By Mazda beast on Wednesday, October 13, 2021
I bought the truck in 2020 I have put 32000 miles on it never had a problem runs great I have had 3 people try to buy it since I have had it could get more out of it than I give but it’s hard to find a reliable truck